Supermicro X13SAZ-F User Manual page 40

Super X13SAZ-F/Q User's Manual
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch and an LED Indicator are located on the motherboard. The UID
switch is located at UID SW on the back panel. The UID LED is located next to the UID switch.
When you press the UID switch, the UID LED will be turned on. Press the UID switch again
to turn off the LED indicator. The UID Indicator provides easy identification of a system unit
that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at
supermicro.com/support/manuals/.
UID Switch
Pin Definitions
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
MH6
LED3
MH5
SRW2 SRW2
22110
SRW1
2280
JIPMB1
SP1
JTPM1
JPT1
USB10/11 (3.1 (5Gb))
JMD1
M.2-C PCIe 4.0 x4
MH8
JF1
JBT1
JPWR1
J18
JGP1
FANB
1
2
UID SW
UID LED
HDMI/DP1
AUDIO FP DVI-D/VGA
LEDBMC
JPL1 JPL2
MAC CODE
BAR CODE
IPMI CODE MB S/N
BIOS LICENSE
X13SAZ
REV: 1.01
DESIGNED IN USA
CPU
MH7
BT1
JPI2C1
MH1
FAN2 USB8/9 (3.2(10Gb))
Pin Definitions
Color
Blue: On
USB4/5 (3.2)
BMC_LAN
LAN1/LAN2 USB6/7 (3.2(10Gb))
MH4
JPH1
FAN1
JPW1
JPV1
MH3
FAN4
FAN3
MH2
40
https://www.
UID LED
Status
Unit Identified
1. UID Switch
2. UID LED