Table of Contents
Advertisement
Chapter 4: BIOS
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options are
Disabled and Enabled.
Above 4G MMIO BIOS Assignment (Available if the system supports 64-bit PCI
decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Disabled and Enabled.
BME DMA Mitigation
Enable this feature to help block DMA attacks. The options are Disabled and Enabled.
Onboard Video Option ROM
Enable this feature to select which onboard video firmware type to be loaded. The options
are Disabled and EFI.
NVMe Firmware Source
The feature determines which type of NVMe firmware should be used in your system. The
options are Vendor Defined Firmware and AMI Native Support.
Consistent Device Name Support
This feature controls the device naming for network devices and slots. The options are
Disabled and Enabled.
PCIe/PCI/PnP Configuration
PCH SLOT4 PCIe 3.0 X4(IN X8) OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
M.2-C PCIe 4.0 x4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
P1 SLOT6 PCIe 5.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
PCH SLOT7 PCIe 4.0 X4(IN X8) OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
95
Advertisement
Table of Contents
