Supermicro X13SAZ-F User Manual page 93

ME FW Image Re-Flash
Use this feature to update the Management Engine firmware. The options are Disabled and
Enabled.
TPM Device Selection
Use this feature to select dTPM or PTT for the TPM device. dTPM is discrete Trusted Platform
Module and PTT is Platform Trusted Technology. The options are dTPM and PTT.
AMT Configuration
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and
Enabled.
MAC Pass Through
Use this feature to enable or disable the MAC Pass Through function. The options are
Disabled and Enabled.
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the
Client Initiated Remote Access (CIRA) boot. The options are Disabled and Enabled.
Unconfigure ME
Use this feature to unconfigure ME with resetting the MEBx password to default on next
boot. The options are Disabled and Enabled.
ASF Configuration

PET Progress
Use this feature to enable or disable PET Events Progress to receive PET Events alerts.
The options are Disabled and Enabled.
WatchDog
Select Enabled to allow AMT to reset or power down the system if the operating system
or BIOS hangs or crashes. The options are Disabled and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog (above) is enabled. This is a timed delay in seconds,
before a system power down or reset after a BIOS or operating system failure is detected.
Enter the value in seconds.
93
Chapter 4: BIOS