Table of Contents
Advertisement
Chapter 4: BIOS
Default Options
Load Optimized Default
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Save & Exit menu and press
<Enter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Save & Exit menu and press
<Enter>. Use this feature to retrieve user-defined settings that were saved previously.
Boot Override
Listed in this section are other boot options for the system (i.e., Built-in EFI shell). The options
may vary on each system. Select an option, press <Enter>, and your system will boot to the
selected boot option.
(B1/D0/F0) UEFI PXE IPv4 Intel(R) Ethernet Controller (3) I225-LM
(MAC:xxxxxxxxxxxx)
(B2/D0/F0) UEFI PXE IPv4 Intel(R) Ethernet Controller (3) I225-LM
(MAC:xxxxxxxxxxxx)
(B1/D0/F0) UEFI PXE IPv6 Intel(R) Ethernet Controller (3) I225-LM
(MAC:xxxxxxxxxxxx)
(B2/D0/F0) UEFI PXE IPv6 Intel(R) Ethernet Controller (3) I225-LM
(MAC:xxxxxxxxxxxx)
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
117
Advertisement
Table of Contents
