Supermicro X13SAZ-F User Manual page 90

Super X13SAZ-F/Q User's Manual
Instance of Priority 2:
Enter a value to set the rank target port. The default is 0.
AST2600SEC Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2600SEC
SOL Configuration
SOL
Use this feature to SOL. The options are Disabled and Enabled.
Device Settings
Reset Required.
NCT6126D Super IO Configuration
The following Super IO information will display:
•
Super IO Chip NCT6126D
Serial Port 1 Configuration
Serial Port 1
Use this feature to enable or disable serial port 1. The options are Disabled and Enabled.
Device Settings
The I/O and IRQ address for serial port 1 is IO=3F8h; IRQ=4;.
Serial Port 2 Configuration
Serial Port 2
Use this feature to enable or disable serial port 2. The options are Disabled and Enabled.
Device Settings
The I/O and IRQ address for serial port 2 is IO=3E8h; IRQ=6;.
Serial Port 3 Configuration
Serial Port 3
Use this feature to enable or disable serial port 3. The options are Disabled and Enabled.
90