Supermicro X13SAZ-F User Manual page 86

Super X13SAZ-F/Q User's Manual
DMI/OPI Configuration

The following DMI information will display:
•
DMI: X8 Gen4
DMI Gen3 ASPM
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disabled, Auto, ASPM L0s, ASPM
L1, and ASPM L0sL1.
PEG Configuration

M.2-C PCIe 4.0 x4
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed in the M.2 slot. The op-
tions are Auto, Gen1, Gen2, Gen3, and Gen4.
ASPM
Use this feature to activate the Active State Power Management (ASPM) level for a PCIe
device. Select Auto for the system BIOS to automatically set the ASPM level based on
the system configuration. Select Disabled to disable ASPM support. The options are
Disabled, L0s, L1, and L0sL1.
L1 Substates
Use this feature to set the PCI Express L1 Substates. The options are Disabled, L1.1,
and L1.1 & L1.2.
P1 SLOT6 PCIe 5.0 X16
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed on SLOT6. The options
are Auto, Gen1, Gen2, Gen3, Gen4, and Gen5.
86