S3 Fwd Speed; Code A, Code B, And Code C; Vehicle S/N; Vehicle Decal - Club Car Electric Precedent 2008 Maintenance And Service Manual

22
Program Menu
NOTE: The SPEED CAL function will not be necessary in most golf applications since the speed setting 3 is finely
adjustable with S3 FWD SPEED. See S3 FWD Speed on page 22-4.

S3 FWD SPEED

The s3 fwd speed option allows for adjustability of the SPEED 3 speed setting. From the factory, s3 fwd speed will be
set to one of 4 options: 12.4, 13.2, 14.0 and 14.8 mph (20.0, 21.3, 22.6 and 23.8 km/h, respectively). The default s3
fwd speed is be 14.8mph (23.8 km/h). The s3 fwd speed may be adjusted with the handset from 11.4 to 14.8 mph (18.3
to 23.8 km/h) in 0.1 mph (0.16 km/h) increments. The speed value chosen for s3 fwd speed may also be observed
in the monitor menu. See Vehicle Speeds (IQDM-P Only) on page 14-7.
To fine tune vehicle top speed in normal golf speed range (12.4 to 14.8mph (20.0 to 23.8 km/h)):
1. Access the program menu, then the speed setting menu with the navigation keys.
2. Select Speed Setting 3 with the change value buttons.
3. Access the program menu and the s3 fwd speed menu with the navigation keys.
4. Use the change value buttons to select desired speed.

CODE A, CODE B, AND CODE C

The code entries are used to place the vehicle in "private speed mode", speed setting code 4. Each vehicle has a
unique code for placing the vehicle in this mode. A vehicle programmed for "private speed mode", speed setting 4,
does not conform to ANSI Z130.1 – American National Standard for Golf Cars – Safety and Performance Specifications
because it is capable of speeds in excess of 15 mph (24.1 km/h). For more information on this feature, contact your
local Club Car distributor or dealer.

VEHICLE S/N

Six digit number programmed by vehicle manufacturer. This menu item is reserved for future accessories.

VEHICLE DECAL

Decal number ranging from 0 - 999 and programmed by vehicle manufacturer. This menu item is reserved for future
accessories.
Page 22-4 2008 Electric Precedent Maintenance and Service Manual
IQ DISPLAY MODULE PROGRAMMER
(IQDM-P): EXCEL SYSTEM