Network Stack Configuration - Avalue Technology EMX-H610P User Manual

Item
USB transfer time-out
Device reset time-out
Device power-up delay
JetF lashTranscend 8GB
1100

3.6.2.10 Network Stack Configuration

Item
Network Stack
Options
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Options
Disabled[Default],
Enabled
Description
The time-out value for Control, Bulk, and Interrupt
transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it properly
reports itself to the Host Controller. 'Auto' uses default
value: for a Root port it is 100ms, for a Hub port the
delay is taken form Hub descriptor.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media format.
Optical drives are emulated as 'CDROM' drives with no
media will be emulated according to a drive type.
Description
Enable/Disable UEFI Network Stack.
EMX-H610P User's Manual 49
User's Manual