Network Stack Configuration - Avalue Technology EMS-EHL Quick Reference Manual

EMS-EHL
Item
XHCI Hand-off
USB Mass Storage Driver
Support
USB transfer time-out
Device reset time-out
Device power-up delay
JetFlashTranscend 8GB
1100

3.6.2.11 Network Stack Configuration

Item
Network Stack
56 EMS-EHL Quick Reference Guide
Options
Enabled[Default],
Disabled
Disabled
Enabled[Default],
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Options
Disabled[Default],
Enabled
Description
This is a workaround for OSes without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
Enable/Disable USB Mass Storage Driver
Support.
The time-out value for Control, Bulk, and
Interrupt transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
drives with no media will be emulated according
to a drive type.
Description
Enable/Disable UEFI Network Stack.