Table of Contents
Advertisement
Sending Originals
6.
Short ID number
An ID number is assigned to each desti-
nation and sender. You can enter a short
ID number and highlight the desired des-
tination or sender.
Note
❒ The short ID number is a number as-
signed by the ScanRouter V2 Admin-
istration Utility. For details on the
short ID number, see the ScanRouter
V2 Administration Utility Help.
3
Sending Scans
Scanned documents are delivered to a
destination registered on the delivery
server.
Note
❒ Scanned originals are sent from
this scanner to the delivery server,
and then delivered to the specified
destination using specific settings.
❒ The delivery method from the de-
livery server to the different users
varies according to the ScanRouter
V2 Administration Utility settings.
A
Set the original.
Note
❒ For details on how to set origi-
nals, see P.29 "Original Setting".
B
Confirm that the network deliv-
ery scanner screen is displayed.
36
Note
❒ If the network TWAIN scanner
screen is displayed, press [Can-
cel].
C
Select the scan conditions.
The main scan conditions current-
ly selected appear on the third line
of the screen. If these settings are
satisfactory, proceed to specify a
destination in step D. To change
these settings or confirm detailed
scan conditions, perform the fol-
lowing procedure.
Note
❒ If you want to clear specified
destinations and scan condi-
tions then start from the begin-
ning, press the {Reset} key.
A Press [Menu].
B Press 0 or 1 to select the scan
conditions of "User 1", "User 2"
or "User 3", and then press [OK].
Note
❒ You can register the desired
scan conditions in Users 1 to
3 in Scanner Features. If you
register frequently used con-
ditions beforehand, you can
easily select scanning condi-
tions. ⇒ P.17 "Scan Setup"
Advertisement
Table of Contents
