Scan Setup; Settings - Ricoh IS330DC Operating Instructions Manual

Scan Setup

You can specify scan conditions when
you scan originals. If you frequently
scan the same type of original, you
can easily select scan conditions when
you send documents if you register
the most suitable scan conditions be-
forehand.
Note
❒ The scan conditions registered for
"Default" are used as the initial
conditions for "Manual settings". If
you do not select any scan condi-
tions when sending documents,
originals are scanned according to
the conditions in "Manual set-
tings". You can also use "Manual
settings" freely to specify scan con-
ditions. ⇒ P.40 "Making Scan Set-
tings Manually"
❒ You can register scan settings un-
der three names: user 1, user 2, and
user 3. If you assign certain condi-
tions to each user, you can easily
switch between scan conditions for
each type of original. For example,
you can assign scan conditions for
color originals to user 1 and scan
conditions for monochrome origi-
nals to user 2.

Settings

There are nine types of scan condi-
tions available:
Note
❒ The default settings described here
are the values registered as "De-
fault". The default settings differ
for each set of scan conditions,
such as user 1.
❖ ❖ ❖ ❖ Scan type
You can scan originals using the
appropriate settings for your type
of original. The factory default is
"Text".
• Text
This refers to standard originals
mainly composed of text.
• Text/Photo
This refers to originals com-
posed of a mix of photos, imag-
es, and text.
• Photo
This refers to photos or binary
image originals.
• Gray Scale
This refers to photos or color/
grayscale image originals.
• Color
This refers to color photos or
color/grayscale image origi-
nals.
Note
❒ While "Photo" does binary scans
only, "Grayscale" does color/
grayscale scans. Binary is a stan-
dard suitable for printing and
color/grayscale is one suitable
for displaying documents on a
computer screen.
Scan Setup
2
17