Ricoh IS330DC Operating Instructions Manual page 56

Ricoh is330dc: user guide
Hide thumbs Also See for IS330DC:
Table of Contents

Advertisement

Appendix
Invalid data size.
Check the scanning resolution..
Job delivery data max.exceeded. The scanned
data has been deleted.
Job delivery data max.exceeded. Send the ex-
isting scanned data or delete to cancel this job.
4
When a scanner Error Message is Displayed
Cover Open
Close left ADF cover.
ADF left in open position.
Close ADF.
Clear Misfeed(s).
Remove originals from ADF.
Cannot scan. Another application is currently
in use.
Functional Problems
Turn the main power switch off then on. If the
error appears again, call service.
46
Message
Message
Cause, Remedy, Reference
• Since the data size of the original exceeds
the current settings for scan conditions
specified in [Job delivery data max. setting]
in Scanner Features, the original cannot be
scanned. Reduce the degree of resolution
in the scan conditions, or increase the max-
imum delivery size per document.
• The data size for the original exceeded the
size set for [Job delivery data max. setting]
in Configuration.
The message above is displayed if the first
page cannot be scanned. If this occurs,
press [Exit].
The message below is displayed if a page
cannot be scanned after the first page is
scanned. To send the data up to the previ-
ous page scanned, press [Send].
If you press [Delete], all data after the first
page is deleted and the document is not
sent.
Rescan the pages that could not be sent as
a separate document.
Cause, Remedy, Reference
• The left panel of the ADF is open. Close the
panel.
• The ADF is open. Close it.
• Some pages are jammed in the ADF. Re-
move the jammed pages.
• The scanner is being used as a network
TWAIN scanner from a client computer.
Wait a moment before continuing opera-
tions.
• Confirm that the scanner is properly con-
nected to the network.
• Restart the scanner. If the error appears
again, note the contents of the error mes-
sage and the error number, and contact
your nearest service center. ("SC4xxx" is
the error number. The number displayed
differs according to the error type.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

400672

Table of Contents