Table of Contents
Advertisement
Remarks
Observe the following points when setting up the scanner or changing settings.
For details, see the documentation and help for ScanRouter V2 Lite, DeskTop-
Binder V2, and the TWAIN driver.
❖ ❖ ❖ ❖ When a dial-up router is connected in a network environment
With the ScanRouter V2 Administration Utility, ScanRouter V2 Link or Desk-
TopBinder V2, for network devices and client computers, the settings for the
delivery server to be connected must be made appropriately.
If the network environment changes, make the necessary changes for the de-
livery server with ScanRouter V2 Administration Utility.
Important
❒ When the software is set up to connect to the delivery server via a dial-up
router, the router will dial and go on-line whenever connection to the de-
livery server is initiated. Telephone charges may be incurred.
❖ ❖ ❖ ❖ When connected to a computer that uses dial-up access
• Do not install ScanRouter V2 Lite/Professional on a computer which uses
dial-up access.
• When using the ScanRouter V2 Administration Utility (ScanRouter V2
Lite/Professional), DeskTopBinder V2, ScanRouter V2 Link, or the
TWAIN driver on a computer with dial-up access, dial-up may be per-
formed when connecting to the delivery server and other equipment. If the
computer is set up to connect to the Internet automatically, the confirma-
tion dialog box will not appear, and telephone charges may be incurred
without the user being aware of it. To prevent unnecessary dial-up, the
computer should be set up so that the confirmation dialog box is always
displayed before establishing a connection. Make sure that no unnecessary
dial-up is performed when using the above listed software.
❖ ❖ ❖ ❖ When working in a WAN environment
In a WAN environment, do not use the ScanRouter V2 Link or other Scan-
Router V2 Administration Utility installed on a client computer. In some net-
work environments, timeout may occur and normal delivery may not be
possible.
4. Appendix
43
Advertisement
Table of Contents
