Table of Contents
Advertisement
Initial Scanner Setup
F
Press [PrevMenu].
G
Press [Network].
2
H
Set the server IP address.
A Press [↓ ↓ ↓ ↓ Next] until [7. Delivery
Server Address] appears, and
then press [OK].
B Enter the server IP address.
Press 0 and 1 to move be-
tween fields.
Note
❒ Confirm the address with
your network administrator.
❒ The IP address is "000.000.000.000"
by default.
C When you are done, press [OK].
The delivery server address is
set.
16
I
Press [PrevMenu].
J
Press [Exit].
K
Restart the scanner.
The network delivery scanner
functions are enabled. Make other
settings as required.
⇒ P.17 "Scan Setup"
⇒ P.23 "Scanner Configuration"
Important
❒ If you change the "Delivery op-
tions" settings, be sure to restart
the scanner because the condi-
tion (enabled or disabled) of the
network delivery scanner func-
tion does not change until then.
Advertisement
Table of Contents
