Table of Contents
Advertisement
Scanning duplex Originals
When performing duplex scans, place your originals in the ADF.
The setting orientation differs depending on whether the width of the original is
within or larger than 297 mm (11.7").
Original width
Placing originals in the
ADF
⇒ P.32 "Setting Originals
in the ADF"
Original direction set-
tings
⇒ P.36 "Sending Scans"
297 mm (11.7") or less
Place the original right side up,
top edge first.
When the original is bound on
either side:
Select ⇒ P.36 "Sending Scans"
[duplex (side bind)].
When the original is bound at
the top:
Select
[duplex (top bind)].
Original Setting
Wider than 297 mm (11.7")
Place the original right side up, in
such a way that the top edge is
set on the far side of the far side
of the ADF tray.
When the original is bound on ei-
ther side:
Select
duplex (side bind).
When the original is bound at the
top:
Select
[duplex (top bind)].
3
31
Advertisement
Table of Contents
