Table of Contents
Advertisement
Initial Scanner Setup
❖ ❖ ❖ ❖ Date(Year/Month/Day)
You can set the date and time. En-
ter the year (4 digits), month, day,
hour (24-hour/12-hour display),
minutes and seconds with the
number keys.
Note
2
❒ When the scanner is used as a
network delivery scanner, client
computer users can use the date
and time to confirm when the
originals were scanned.
❖ ❖ ❖ ❖ Compression(Binary)
It is possible to choose to apply bi-
nary compression (B&W) to scan
data. By compressing the data, you
reduce the amount of time it takes
to transfer the data to the delivery
server. You can select from "Off",
"MH", "MR" and "MMR".
The factory default is "MMR".
Note
❒ Compression makes data transfer
from the scanner to the delivery
server much faster. Data trans-
ferred to the delivery server is
compressed according its settings.
❒ The compression rates in se-
quence from high to low are
"MMR", "MR", "MH", "Off". It
takes longer to send noncom-
pressed data.
❒ The amount of time it takes to
transfer data differs depending
on the size of the data and the
network conditions.
24
❖ ❖ ❖ ❖ Compression(Color/Gray Scale)
It is possible to choose to apply a
degree of binary compression to
data scanned in color/grayscale.
By compressing the data, you re-
duce the amount of time it takes to
transfer the data to the delivery
server. You can select from "Off",
"Standard", "Low" and "High".
The factory default is "Standard".
Note
❒ Compression makes data trans-
fer from the scanner to the de-
l i v e r y s e r v e r f a s t e r . D a t a
transferred to the delivery serv-
er is compressed according to
the its settings.
❒ The compression rates in se-
quence from high to low are:
"High", "Standard", "Low" and
"Off". It takes longer to send
noncompressed data.
❒ The amount of time it takes to
transfer data differs depending
on the size of the data and the
network conditions.
❖ ❖ ❖ ❖ Delivery Options
You can set the scanner as a net-
work delivery scanner with the
ScanRouter V2 Lite or ScanRouter
V2 Professional (sold separately).
If you select "Installed" for the De-
livery options, you can make the
settings below. If you select "Not
installed", no settings are available.
• "7. Delivery Server Address" in
Network setup.
• Scan conditions
• "1. Function Priority", "2. Enter
number", "3. Scanner Auto Re-
set Tim er", "4 . Date(Y ear/
Month/Day)", "8. Auto Address
Update", "9. Unit of Measure",
"11. End of Scan Option" and
"15. Job delivery data max. set-
ting" in Configuration.
Advertisement
Table of Contents
