Table of Contents
Advertisement
MONITORING SOLUTION ENERGY
CONFIGURATION OF THE CONNECTION
The default IP address is printed on the serialization label on the back of the reader. This IP address
can be modified using the software (see
To connect a computer to the reader, the Ethernet card must be configured as follows:
NOTE
TO RESET IP OF THE AMS01 READER, HOLD THE RESET BUTTON UNTIL ALL LEDS ARE FLASHING GREEN.
THIS CAN TAKE UP TO 15 SECONDS.
AMS01 Configuration Tool User Manual
www.senseor.com
'Settings'
tab)
• IP address = 10.200.1.100
• Subnet mask = 255.255.0.0
8/29
Advertisement
Table of Contents
