MONITORING SOLUTION ENERGY
SYSTEM TEST TAB
This window allow to check the system installation by performing the measurement of selected
elements (temperature sensors and partial discharge probes).
This test is activated with the 'Play' button
Uncheck the toggle buttons in front of temperature sensor or PD probe to not run a measurement on
this elements.
Data from this test mode are also available on Modbus registers and in µSD card.
NOTE
DURING THE SYSTEM TEST IT IS NO LONGER POSSIBLE TO ACTIVATE OR DEACTIVATE MEASUREMENT
ELEMENTS (TEMPERATURE SENSORS AND PD PROBES).
AMS01 Configuration Tool User Manual
www.senseor.com
26/29