MONITORING SOLUTION ENERGY
INSTALLATION TAB
This tab is used to configure temperature sensors and partial discharge detection probes installation.
For installation details, please refer to the
ENVIRONMENTAL SENSOR
This location shows the information from the external humidity and temperature sensor if connected.
Data are obtain by click on the refresh button
TEMPERATURE INSTALLATION SETTINGS
Only applicable for 'AMS01-T' and 'AMS01-TP' readers.
The AMS01 system needs a reference temperature for sensor validation.
This section allows use of different sources for temperature selection.
AMS01 Configuration Tool User Manual
www.senseor.com
'UM00403-AMS01 User
.
Manual'.
14/29