When "Remove Misfeed Paper Exit Cover" Appears - Ricoh AP410 Maintenance Manual

Removing Misfed Paper
When "Remove Misfeed Paper Exit Cover"
Appears
• When removing misfed paper, do not touch the fusing section because it
becomes very hot.
• The fusing unit becomes very hot. When installing the new fusing unit, turn
off the printer and wait about an hour. After that, install the new fusing unit.
Not waiting for the unit to cool down can result in a burn.
❒ Forcefully removing misfed paper may cause paper to tear and leave scraps
of paper in the printer. This might cause a misfeed and damage the printer.
Removing misfed paper from the Internal Path
A
Open the front cover by pushing the front cover release button.
B
Lift the front side of the toner cartridge, and then pull it out of the printer.
❒ Be sure to put the toner cartridge on a stable, flat surface.
101