Ricoh AP410 Maintenance Manual page 77

Troubleshooting
Messages/Second
messages
Hardware Problem
HDD
Description
An error has occurred in the op-
tional hard disk drive.
Solution
Turn the power off, and then on. If the
message appears again, call your
sales or service representative.
Turn off the power switch. Replace the
Hard Disk Drive and turn on the power
switch.
See "Attaching Hard Disk Drive Type
2600", Setup Guide.
Turn off the power switch. Remove
the Hard Disk Drive and turn on the
power switch.
❒ If the Hard Disk Drive is not in-
stalled, you cannot send the sam-
ple print job, locked print job and
download the font to Hard Disk
Drive using the PS Utility for Mac.
77