Ricoh AP410 Maintenance Manual page 6

Paper and Other Media
× 13)
1
Folio (8 /
4
× 13)
1
Foolscap (F4, 8 /
2
F/GL (8 × 13)
× 9
1
Com#10 Env (4 /
8
C5 Env (6.38 × 9.02)
C6 Env (4.49 × 6.38)
DL Env (4.33 × 8.66)
7
Monarch Env (3 /
8
Custom Size
16K (7.68 × 10
1
/ )
2
•
The size is supported and indicated on the tray dial. Be sure to set the pa-
per size dial to match the actual paper size loaded in the tray.
•
The size is supported but not indicated on the tray dial. You should set the
tray dial to "p", and select the paper size with the control panel.
•
The size is supported but the paper size should be set with the control pan-
el. There is no dial on the tray.
See p.26 "Loading Paper in the Bypass Tray"
See p.33 "Loading Envelopes"
•
The size is supported, but it should be set as a custom size using the con-
trol panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
The following sizes are supported:
• Tray 1: approximately 139.7 - 216 mm in width, and 139.7 - 356 mm in
length.
• Bypass Tray: approximately 90 - 216 mm in width, and 139.7 - 432 mm
in length.
210 × 330
K
216 × 330
K
203 × 330
K
104.8 × 241.3
K
1
/ )
2
162 ×229
K
114 ×162
K
110 × 220
K
98.4 × 190.5
× 7
K
1
/ )
2
- -
195 × 267
K
×
×
×
× ×
× ×
× ×
× ×
× ×
×
×
6