Ricoh AP410 Maintenance Manual page 115

Appendix
C
Lift the printer with two people by using the inset grips on both side of
the printer, and then move it horizontally to the place where you want to
install it.
❒ When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
❒ Be sure to move the printer horizontally. Moving the printer facing up on
down may cause the toner to scatter.
❒ If the optional paper feed unit(s) is installed, detach and move the printer
separately. Never move the printer with the paper feed unit(s) attached.
D
If you removed options, reinstall them.
See Setup Guide for installing options.
115