Ricoh AP410 Maintenance Manual page 30

Paper and Other Media
For details about control panel settings for custom size paper or special pa-
per, see p.30 "Specifying custom size paper for the Bypass
To select custom size paper (148 - 900 mm in length, 70 - 216 mm in
width), see p.30 "Specifying custom size paper for the Bypass
For control panel settings when using thick paper, OHP transparencies, or
post cards, see
Specifying custom size paper for the Bypass Tray
❒ The settings of custom sized paper that take effect are not the settings made
on the control panel but the settings made in the printer driver. There is no
need to change the settings on the control panel. However, when using a
printer driver other than RPCS, you will need to change the settings on the
control panel.
❒ Applications that do not allow a custom paper size to be set cannot print on
custom sized paper.
❒ Prints may blur if you use paper of A4K or 8
A
Press the {Menu} key.
The [Menu] screen appears on the display.
B
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
Menu:
Paper Input
The paper selection menu appears.
C
Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu appears.
p.31 "Specifying a paper type for the Bypass
Tray".
Tray".
1
x 11 K length or longer.
/
2
Tray".
30