Ricoh AP410 Maintenance Manual page 73

Adjusting the Printer
F
Confirm the position of the image on the test sheet, and then adjust the
registration value.
In this setting, adjust the margins of the test sheet so that they are equal in
size.
G
Press the {U} or {T} key to display [Adjustment], and then press the {#
Enter} key.
H
Press the {U} or {T} key to display the parameter to be adjusted, and
then press the {# Enter} key.
Adjustment:
Horiz: Tray 2
I
Press the {U} or {T} key to set the registration value (mm).
Horiz: Tray 2:
(-4.0 +4.0) 0.0
Increase the value to shift the print area in the positive direction, and decrease
to shift in the negative direction.
❒ Pressing the {U} or {T} key makes the value increase or decrease by 1.0
mm steps.
73