Huawei LUNA2000-5-NHS0 User Manual page 82

LUNA2000-(5-30)-NHS0

User Manual

7.3.1 Device Commissioning (FusionSolar App)

(Recommended)

For details about how to use the site deployment wizard, see

Energy Storage System Setting App

scan the QR code to download the quick guide.

Figure 7-1 Residential PV energy storage system setting app guide

After the construction is complete, check the installation by referring to the

Checklist for the Construction of Residential PV Energy Storage

Figure 7-2 Checklist for the construction of the residential PV energy storage

system

7.3.2 Battery Maintenance and Upgrade

Querying the Battery Status

On the home screen, tap Device monitoring > Maintenance > Subdevice

management on the home screen to view the running status, level, power, and

charge and discharge status of the battery.

Issue 11 (2023-04-15)

NO TE

● During system deployment, if the communications cables Enable+/Enable– are correctly

connected, the SUN2000 enables the battery and the indicator is on. Do not press the

black start button to enable the battery. Otherwise, the communications cable

connection between the SUN2000 and the battery cannot be verified.

● If no PV modules are installed or the system has not detected sunlight for at least 24

hours, the minimum end of discharge SOC is 15%.

Guide. During the FusionSolar app upgrade,

7 System Commissioning

Residential PV

System.