Advertisement
LUNA2000-(5-30)-NHS0
User Manual
● Wear personal protective equipment and use dedicated insulated tools to avoid
● During the power-on procedure, power off the batteries immediately if any
● After batteries are used for system commissioning or batteries have discharged,
● Battery overdischarge and damage may occur if batteries with low SOC are
Before the equipment is put into operation for the first time, ensure that the
parameters are set correctly by professional personnel. Incorrect parameter
settings may result in noncompliance with local grid connection requirements and
affect the normal operations of the equipment.
7.1 Verification Before Power-On
Table 7-1 Check items and acceptance criteria
No.
1
Issue 11 (2023-04-15)
7
D ANGER
electric shocks or short circuits.
CA UTION
fault is detected. Rectify the fault before proceeding with the procedure.
charge the batteries in time. Otherwise, batteries may be damaged due to
overdischarge.
stored. Batteries should be recharged in a timely manner.
NO TICE
Check Item
Battery installation
Copyright © Huawei Technologies Co., Ltd.
System Commissioning
Acceptance Criteria
The installation is correct and reliable.
7 System Commissioning
72
Advertisement
