Advertisement
LUNA2000-(5-30)-NHS0
User Manual
Step 1 Connect the PE cable to the battery power control modules and battery expansion
modules.
Figure 6-2 Connecting the internal PE cable
----End
6.2.2 Installing Internal DC Terminals
Step 1 Insert the positive and negative connectors delivered with the battery into the
positive and negative battery cascading terminals (B+ and B–).
Issue 11 (2023-04-15)
NO TE
It is recommended that silica gel or paint be used around the ground terminal after the PE
cable is connected.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connection
54
Advertisement
