Table of Contents
Advertisement
Figure 2-31 Secure Junction Box to Wall
5. Dissemble the camera and secure the mounting
base to junction box with three PM 4 × 25 screws.
Figure 2-32 Secure Mounting Base to Junction Box
6. Route the cables through the cable hole.
7. Install the camera back to the mounting base and
secure it.
8. Refer to step 7 to 8 of 2.3.1 Ceiling Mounting to
adjust the angle and finish installation.
2.4.3 Wall Mounting
Wall mounting of Type III camera and wall mounting of
Type IV camera are similar. You can refer to 2.3.3 Wall
Mounting to finish installation.
Note:
You need to purchase a wall mount in advance.
3 Menu Description
Please follow the steps below to call the menu.
Note:
Advertisement
Table of Contents
