HIKVISION D0T POC C Series User Manual page 9

3). Loosen screw B to adjust the rotation position [0°
to 360°].
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.

The installation of ceiling mounting and wall

mounting are similar. Following takes wall mounting
as an example.
1. Paste the drill template on the wall.
2. Drill screw holes and the cable hole on the wall
according to the drill template.
Figure 2-3 Drill Template of Junction Box
3. Take apart the junction box, and align the screw
holes of the camera with those on the junction
box's cover.
4. Attach the camera on the junction box's cover with
supplied screws.
Figure 2-4 Attach Camera on Junction Box's Body
5. Secure the junction box's body on the wall with
supplied screws.
Figure 2-5 Secure Junction Box on Wall
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body with
three PM3 × 16 L6 screws.
Junction Box
Body