HIKVISION D0T POC C Series User Manual page 15

2.3.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Use three PM4 × 10 screws to fix the gang box onto
the wall mount.
4. Repeat the step 6 to 8 of
Ceiling Mounting to adjust the angle and finish the
installation.
2.3.4 Adjust Zoom and Focus
Tighten or loosen the screws by a straight screwdriver
to adjust the zoom and focus.

F/N: Screw to the direction of F to focus far,
and screw to the direction of N to focus near.

T/W: Screw to the direction of T to zoom in,
and screw to the direction of W to zoom out.
Figure 2-24 Finish Installation
Figure 2-25 Fix Wall Mount
Figure 2-26 Fix Gang Box
Figure 2-27 Finish Installation
错误 未找到引用源。
!