HIKVISION D0T POC C Series User Manual page 14

2.3.2 Ceiling Mounting with Junction Box/Inclined
Ceiling Mount
Before you start:
You need to purchase a junction box or an inclined

ceiling mount in advance.
Ceiling mounting with junction box and inclined

ceiling mount are similar. Following steps take
junction box installation as an example.
Steps:
1. Drill screw holes on the wall.
2. Take apart the junction box, and align the screw
holes of the mounting base with those on the
junction box's cover.
3. Install the mounting base to the junction box's cover
with three PM4 screws.
Figure 2-21 Secure Mounting Base on Junction Box's
4. Secure the junction box's body on the wall with four
PA4 × 25 screws.
Figure 2-22 Secure Junction Box's Body
5. Route the cables and use four PM4 screws to
combine the junction box's cover with its body.
Figure 2-23 Combine Junction Box Cover with its Body
6. Repeat the step 6 to 8 of 2.3.1 Ceiling Mounting to
finish the installation.
Figure 2-20 3-Aixs Adjustment
Cover