Description; Woofers; Midbass - REVELL Ultima Salon User Manual

DESCRIPTION

SALON features a transducer complement (see Figure 2) of three
8-inch woofers, a 6.5-inch midbass driver, a 4-inch midrange, and
1.1-inch tweeter. A second 0.75-inch tweeter (on the rear) provides
added high-frequency energy to enhance overall "room response."
Tweeter
Midrange

Midbass

Woofer
Woofer
Woofer
SALON Front
(without grilles)
Combined with an individually-optimized crossover network, this
transducer arrangement results in an extraordinary off-axis
response that provides a large "listening window" and an uncolored
in-room response, even in the presence of strong wall reflections.

WOOFERS

For uncompressed dynamic range, each SALON uses three 8-inch
mica/carbon-filled co-polymer dome woofers with these features:
• The woofer's radiating surface is made of an injection-molded
polymer material with incredible stiffness and internal damping.
• Optimized magnetic circuits to minimize harmonic distortion.
• Oversized 1.5-inch diameter voice coil with flat aluminum wire
offer higher power handling and long excursion capability.
MIDBASS
For ideal midbass reproduction, each SALON uses a 6.5-inch
mica/carbon-filled co-polymer dome midbass with these features:
• A long voice-coil excursion within an advanced suspension.
• A copper shorting ring for less inductance and flux modulation.
4 SALON
Owner's Manual
Tweeter
Woofer Port
Front Tweeter
Level Control
Front Tweeter Level LF Compensation Rear Tweeter Level
-1 +1
+.5 + -3
-.5 0 0 Off 0
Connectors (with
Install straps for
single-wired operation
Install straps for
single-wired operation
shorting straps) Remove straps
Low Frequency Input or bi-amp for bi-wire High Frequency Input
Serial Number
xxxx
Revel Corporation
TM Chatsworth, California
Made in U.S.A.
SALON Rear
Figure 2. The SALON transducer
and connection locations.
LF Compensation
Control
Rear Tweeter
Level Control