Table of Contents
Advertisement
PRODUCT REGISTRATION
Please register the C50a within 15 days of purchase. To do so,
register online at www.revelspeakers.com or complete and return
the included product registration card. Retain the original, dated
sales receipt as proof of warranty coverage.
DESCRIPTION
The Revel Performa C50a loudspeaker uses two 6.5-inch (165mm)
ceramic-composite woofers, a 4-inch (102mm) ceramic-composite
midrange, and a 1-inch (25.4mm) aluminum-dome tweeter.
Woofer
Woofer
Tweeter
Midrange
REVEL PERFORMA
C50a Front (without grille)
Combined with an individually-optimized crossover network, this
transducer arrangement provides a uniform "listening window" or
area in which the sound varies little. The dual high power-handling
woofers and high-order crossover networks assure an extraordinary
dynamic range capability with very low dynamic compression. Full
magnetic shielding allows use near a video monitor.
WOOFERS
The two 6.5-inch (165mm) woofers feature:
• 1.2-inch (30.5mm) diameter voice coils wound on glass-rein-
®
forced Kapton
bobbins for outstanding dynamic capability and
freedom from compression.
• Ceramic-composite cones feature an optimum combination
of stiffness and low mass for low coloration and distortion, and
fully-pistonic operation throughout their entire operating range.
• Massive motor system and specially vented spiders for
high-power handling and low dynamic compression.
• Die-cast basket to eliminate coloration from resonances.
REVEL PERFORMA C50a
4
Owner's Manual
Placement
High-Frequency
Compensation
Level Control
Control
On Top of
Monitor
0
-.5
+.5
Flush
Stand
Mounted
Mounted
-1
+1
Connector
Placement
High Frequency
Connector
Compensation
Level (dB)
(See Owner's Manual)
Revel
Northridge, California
Made in U.S.A.
Serial No.
REVEL PERFORMA
C50a Rear
Figure 2. The Revel Performa
C50a transducer and connection
locations.
Advertisement
Table of Contents
