Description; Woofers; Midrange - REVELL Performa C50 User Manual

DESCRIPTION

The REVEL PERFORMA C50 loudspeaker uses two 6.5-inch (165
mm) ceramic-composite woofers, a 4-inch (102 mm) ceramic-com-
posite midrange, and a 1-inch (25 mm) aluminum-dome tweeter.
Woofer Woofer
Tweeter

Midrange

REVEL PERFORMA
C50 Front (without grille)
Combined with an individually-optimized crossover network, this
transducer arrangement provides a uniform "listening window" or
area in which the sound varies little. The dual high power-handling
woofers and high-order crossover networks assure an extraordinary
dynamic range capability with very low dynamic compression. Full
magnetic shielding allows use near a video monitor.

WOOFERS

The two 6.5-inch (165 mm) woofers feature:
• 1.2-inch (30.5 mm) diameter voice coils wound on glass-rein-
®
forced Kapton bobbins for outstanding dynamic capability and
freedom from compression.
• Ceramic-composite cones feature an optimum combination
of stiffness and low mass for low coloration and distortion, and
fully-pistonic operation throughout their entire operating range.
• Massive motor system and specially vented spiders for
high-power handling and low dynamic compression.
• Die-cast basket to eliminate coloration from resonances.
MIDRANGE
The 4-inch (102 mm) midrange features:
• 1-inch (25 mm) diameter voice coil on a glass-reinforced
®
Kapton former for extraordinary power handling and freedom
from distortion.
REVEL PERFORMA C50
4
Owner's Manual
Placement High-Frequency
Compensation Level Control
Control
On Top of
Monitor 0
-.5 +.5
Flush Stand
Mounted Mounted -1 +1
Connector Placement High Frequency Connector
Compensation Level (dB)
(See Owner's Manual)
Revel
Northridge, California
Made in U.S.A.
Serial No.
REVEL PERFORMA
C50 Rear
Figure 2. The REVEL PER-
FORMA C50 transducer and
connection locations.