Table of Contents
Advertisement
DESCRIPTION
The REVEL PERFORMA S30 loudspeaker features a 6.5-inch
(165 mm) high-power handling woofer, two 4-inch (102 mm)
full-range drivers with specially-designed dispersion patterns, and
an aluminum-alloy dome 1-inch (25 mm) tweeter.
Full Range
Full Range
Driver
Driver
Tweeter
Woofer
REVEL PERFORMA
S30 Front (without grilles)
The REVEL PERFORMA S30 loudspeaker also features a user-
selectable control for dipole or monopole dispersion that optimizes
the system for any recording format. When used in dipole mode, a
unique radiation angle allows more listeners to enjoy theater-like
performance for film sound, and more natural results in reproducing
music. When used in monopole mode, the unique design facilitates
placement which matches surround-music monitoring standards.
WOOFER
The 6 .5-inch (165 mm) woofer features:
• 1.5-inch (38 mm) diameter voice coil on a Kapton
extraordinary power handling and freedom from distortion in
monopole and dipole modes.
• Fully-pistonic operation throughout its entire operating range
for low coloration and distortion.
• Die-cast basket to eliminate coloration from resonances.
FULL-RANGE DRIVERS
Each 4-inch (102 mm) full-range driver features:
• 1.5-inch (38 mm) diameter voice coil on a Kapton
extraordinary power handling and freedom from distortion.
REVEL PERFORMA S30
4
Owner's Manual
Connectors
Serial Number
xxxx xxxx
Remote Terminals
Mode Control
A
Speaker
Hi-Frequency
Label
Level Control
Mounting Bracket (1 of 3)
REVEL PERFORMA
S30 Rear
Figure 2. The REVEL
PERFORMA S30 transducer,
Revel
Northridge, California
Made in U.S.A.
control, and connection locations.
NOTE: The front view shows a
B
B loudspeaker. The rear view
Speaker
Label
shows label locations of A and B
loudspeakers. See "Placement" on
page 7.
®
former for
®
former for
Advertisement
Table of Contents
