Product Registration; Description; Woofers - REVELL Performa F50 Owner's Manual

PRODUCT REGISTRATION

Please register the F50a within 15 days of purchase. To do so,
register online at www.revelspeakers.com or complete and return
the included product registration card. Retain the original, dated
sales receipt as proof of warranty coverage.

DESCRIPTION

The Revel Performa F50a loudspeaker features a transducer comple-
ment (see Figure 2) of three 6.5-inch (165m) woofers, a 5.25-inch
(133mm) midrange driver, and a 1-inch (25.4mm) tweeter.
Tweeter
Midrange

Woofers

REVEL PERFORMA F50a Front
(without grille)
Combined with an individually-optimized crossover network, this
transducer arrangement results in a superior off-axis response that
provides a large uniform listening area and an uncolored in-room
response, even in the presence of strong wall reflections.
WOOFERS
Each 6.5-inch (165mm) ceramic-composite cone woofer features:
• A ceramic cone that provides the advantages of stiff, light true
ceramic material through the use of a unique high temperature
process that results in a strong ceramic composite.
• Little or no energy storage and no breakup modes throughout
its operating range, resulting in low distortion.
• Magnetic shielding to prevent interference with video monitors.
• A vented spider for better cooling and low compression.
REVEL PERFORMA F50a
4
Owner's Manual
Woofer Port
-.5 0 +.5
-1 +1
Revel Front Tweeter Level (dB)
Northridge, California
Made in U.S.A.
Remove straps
for bi-wire
Connectors (with Serial Number Install straps for or bi-amp
xxxx single-wire operation
Install straps for
single-wire operation
shorting straps)
Low Frequency Input High Frequency Input
REVEL PERFORMA F50a Rear
Figure 2. The Revel Performa
F50a transducer and connection
locations.
Tweeter
Level Control