Description; Woofer - REVELL Performa F30 User Manual

DESCRIPTION

The REVEL PERFORMA F30 loudspeaker features a transducer
complement (see Figure 2) of one 10-inch (250 mm) woofer, a
5.25-inch (133 mm) midrange driver, and a 1-inch (25 mm) tweeter.
Tweeter
Midrange

Woofer

REVEL PERFORMA F30 Front
(without grilles)
Combined with an individually-optimized crossover network, this
transducer arrangement results in a superior off-axis response that
provides a large "listening window" and an uncolored in-room
response, even in the presence of strong wall reflections.
WOOFER
The 10-inch (250 mm) inverted aluminum-dome woofer features:
• True pistonic operation for increased freedom from coloration.
• Optimized and shielded magnetic circuits to minimize harmonic
distortion and prevent interference with video monitors.
• Butyl rubber surround for large, linear excursion capabilities.
• CCA (carbon composite aluminum) flat-wire voice coil on a
2–inch (50 mm) fiberglass bobbin for low mass with high
power handling.
• Vented center-pole piece for better cooling and low compression.
4 REVEL PERFORMA F30
Owner's Manual
Woofer Port
0 +.5
-.5
-1 +1
Front Tweeter Level (dB)
Revel
Northridge, California
Made in U.S.A.
Connectors (with Serial Number Install straps for Remove straps
xxxx single-wire operation for bi-wire
or bi-amp
Install straps for
single-wire operation
shorting straps)
Low Frequency Input High Frequency Input
REVEL PERFORMA F30 Rear
Figure 2. Transducer and con-
nection locations for the REVEL
PERFORMA F30 loudspeaker.
Tweeter
Level Control