Single-Wired System Connections - REVELL Ultima Salon User Manual

SPEAKER CONNECTIONS (Cont'd)

SINGLE-WIRED SYSTEM CONNECTIONS

For single-wired applications, simply leave the shorting straps in
place and connect the + and - from a single amplifier channel to
the + and – terminals on the rear of the SALON, as shown in
Figure 9.
SALON
Rear
Connector
Panel
Front Tweeter Level
-1 +1
-.5 +.5
0
wht
Install straps for
single-wired operation
Low Frequency Input
TM
Front Tweeter Level LF Compensation Rear Tweeter Level
(one channel shown)
-1 +1
-.5 +.5 + Off -3
0 0 0
Install straps for
single-wired operation
Install straps for
single-wired operation
Remove straps
for bi-wire
Low Frequency Input or bi-amp High Frequency Input
Serial Number
xxxx
Revel Corporation Chatsworth, California
TM Made in U.S.A.
12 SALON
Owner's Manual
Amplifier
(one channel shown)
LF Compensation Rear Tweeter Level
+
Off -3
0 0
red
Install straps for
single-wired operation
High Frequency Input
Shorting Strap
Serial Number
(leave both in place)
xxxx
Revel Corporation
Chatsworth, California
Made in U.S.A.
Figure 9. How to connect the
SALON speaker in a single-
(rear)
wired system.