Operation Method - Panasonic AW-SW350E Operating Instructions Manual

5
The installer programme shown in Fig.7 now starts. Proceed with the installation by
following the installer instructions.
Fig.7 Application programme installer start screen
6
This completes the installation of the application programme.
Fig.8 Application programme installation completion screen
26 (E)

OPERATION METHOD

This section describes how to operate the application programme used with the USB
image transfer programme for the AW-SW350.
1
Connect the host computer to the AW-SW350.
(Check that the AW-SW350's power is on.)
2
The main screen shown in Fig.9 appears when the application programme used with
the USB image transfer programme for the AW-SW350 is started up.
Fig.9 Application programme main screen
3
When the "Open File" button is clicked, the file selection dialogue box shown in Fig.10
appears. Select the image file (BMP, JPG or JPEG) to be transferred, and click "OK".
Fig.10 File selection dialogue box
27 (E)