Table of Contents
Advertisement
e) "Set defined macro" is displayed. Enter "_UART_" in the "Macro" field and press [OK]
f)
To set the link option, in the "Renesas M16C Standard Toolchain" window, click on the
"Link" tab and select "Section Order" from the "Category" pull-down menu. Add the
following to the start address of the monitor program occupied area shown in Table 1.
•
Memory size: 48KB
FirmArea_NE
•
Memory size: 64KB, 96KB, 128KB
FirmArea_FE
When the above settings cause the user program to overlap with the monitor program
occupied area, an error is output.
24
Advertisement
Table of Contents
