[20 mph]) and press the "-SET"
switch to set the speed.
Cruise control "SET" indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set
speed.
Adjusting the speed setting: P.216
Canceling and resuming the speed set-
ting: P.217
Dynamic Radar Cruise Con-
trol with Road Sign Assist
(vehicles with RSA)
When this function is enabled and
the system is operating in vehicle-
to-vehicle distance control mode
(P.214), when a speed limit sign
is detected, the recognized speed
limit will be displayed with an
up/down arrow. The set speed can
be increased/reduced to the recog-
nized speed limit by pressing and
holding the "+RES"/"-SET" switch.
When the current set speed is
lower than the recognized speed
limit
Press and hold the "+RES" switch.
4-5. Using the driving support systems
When the current set speed is
higher than the recognized
speed limit
Press and hold the "-SET" switch.
Enabling/Disabling the
Dynamic Radar Cruise Con-
trol with Road Sign Assist
(vehicles with RSA)
Dynamic Radar Cruise Control with
Road Sign Assist can be
enabled/disabled in the
on the multi-information display.
(P.75)
■
Dynamic radar cruise control with
full-speed range can be set when
●
The shift lever is in D.
●
The desired set speed can be set
when the vehicle speed is approxi-
mately 30 km/h (20 mph) or more.
(However, when the vehicle speed is
219
4
screen