Toyota RAV4 2019 Owner's Manual page 175

sensor is extremely high
• Surrounding brightness levels are
equal to those of headlights, tail lights
or fog lights
• When headlights or tail lights of vehi-
cles ahead are turned off, dirty, chang-
ing color, or not aimed properly
• When the vehicle is hit by water,
snow, dust, etc. from a preceding
vehicle
• When driving through an area of inter-
mittently changing brightness and
darkness
• When frequently and repeatedly driv-
ing ascending/descending roads, or
roads with rough, bumpy or uneven
surfaces (such as stone-paved roads,
gravel roads, etc.)
• When frequently and repeatedly tak-
ing curves or driving on a winding
road
• There is a highly reflective object
ahead of the vehicle, such as a sign or
mirror
• The back of a vehicle ahead is highly
reflective, such as a container on a
truck
• The vehicle's headlights are damaged
or dirty, or are not aimed properly
• The vehicle is listing or titling due to a
flat tire, a trailer being towed, etc.
• The high beam and low beam are
repeatedly being switched between in
an abnormal manner
• The driver believes that the high beam
may be causing problems or distress
to other drivers or pedestrians nearby
■
If "Headlight System Malfunction
Visit Your Dealer" is displayed on
the multi-information display
The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer.
Turning the high beam
on/off manually
■
Switching to the low beam
Pull the lever to original position.
4-3. Operating the lights and wipers
The Automatic High Beam indicator will
turn off.
Push the lever away from you to acti-
vate the Automatic High Beam system
again.
■
Switching to the high beam
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Auto-
matic High Beam system again.
173
4