Toyota RAV4 2019 Owner's Manual page 104

102
3-2. Opening, closing and locking the doors
WARNING
●
The jam protection function may not
work if something gets caught just
before the back door fully closes.
Be careful not to catch fingers or
anything else.
●
The jam protection function may not
work depending on the shape of the
object that is caught. Be careful not
to catch fingers or anything else.
NOTICE
■
Back door spindles
The back door is equipped with spin-
dles that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage
to the back door spindle, resulting in
malfunction.
●
Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the spindle rod.
●
Do not touch the spindle rod with
gloves or other fabric items.
●
Do not attach heavy accessories to
the back door. When attaching, ask
your Toyota dealer for details.
●
Do not place your hand on the spin-
dle or apply lateral forces to it.
■
To prevent back door closer mal-
function
Do not apply excessive force to the
back door while the back door closer
is operating. Applying excessive force
may cause the back door closer to
malfunction.
■
To prevent damage to the power
back door
●
Make sure that there is no ice
between the back door and frame
that would prevent movement of the
back door. Operating the power
back door when excessive load is
present on the back door may
cause a malfunction.
●
Do not apply excessive force to the
back door while the power back
door is operating.
●
Take care not to damage the sen-
sors (installed on the right and left
edges of the power back door) with
a knife or other sharp object. If the
sensor is disconnected, the power
back door will not close automati-
cally.
Changing settings of the
power back door system
(vehicles with power back
door)
The settings of the power back door
system can be changed by display-
ing the "Vehicle Settings" - "PBD"
screen from the
multi-information display. (P.75)
The changed power back door settings
are not reset by turning the engine
switch to OFF. In order to restore the
original settings, they need to be
changed back on the
multi-information display.
screen of the
screen of the