216
4-5. Using the driving support systems
on.
The vehicle speed at the moment the
switch is released becomes the set
speed.
Adjusting the set speed
To change the set speed, press the
"+RES" or "-SET" switch until the
desired set speed is displayed.
1
Increases the speed (Except
when the vehicle has been
stopped by system control in
vehicle-to-vehicle distance con-
trol mode)
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and
release when the desired speed is
reached.
In the vehicle-to-vehicle distance
control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: Increases or
decreases in 5 km/h (3.1 mph)
*2
mph (8 km/h)
increments for as long
as the switch is held
In the constant speed control mode
(P.218), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: The speed will con-
tinue to change while the switch is held.
*1
: When the set speed is shown in
"km/h"
*2
: When the set speed is shown in
"MPH"
Changing the vehicle-to-
vehicle distance (vehicle-to-
vehicle distance control
mode)
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
*1
each time the
*1
or 5
*1
each time the