Selecting The Display Mode - Raymarine DSM250 Owner's Handbook Manual

5-6

Selecting the Display Mode

➤
DISPLAY
SPLIT
HOR VER
The controls are summarized in the laminated Quick Reference
card that accompanies this handbook.
If the data is available on your system, the following display
modes can be selected:
• Radar
• Chart
• Sonar (Fishfinder)
• Data Log
You use the DISPLAY key to select the full-screen display mode.
The DISPLAY key also accesses the soft keys for the half-screen
window options for additional information.
To select Sonar mode:
1. Press the DISPLAY key.
The DISPLAY pop-up appears, as shown in Figure 5-1 . The
selected mode is shown by an icon with a black (monochrome dis-
play) or red (color LCD) border and the mode is displayed on the
screen.
2. Continue to press DISPLAY until SONAR mode is shown.
3. Press ENTER or CLEAR.
The Sonar screen is displayed with its default soft keys. The asso-
ciated half-screen window soft keys are also displayed.
You can also set Windows On to split the display into two half-
screen windows (horizontal or vertical) to show supplementary
data, or to display sonar and chart or radar simultaneously. Split
screen options are described in the following sections.
DSM250 Digital Sounder Module