Table of Contents
Advertisement
5-8
➤
DISPLAY
•
Chart display: If data is available on the display or via the
link, it can be displayed.
•
Radar display: If data is available on the display or via the
link, it can be displayed.
•
Depth/temp graph (Sonar mode only): This shows a plot water
temperature and depth against time.
•
CDI: This gives the Course Deviation Indicator graphical dis-
play, with data relating to the target waypoint.
•
BDI: This gives the Bearing and Distance Indicator graphical dis-
play, with data relating to the target waypoint.
•
Nav Data (Chart or Radar mode): This shows sixteen data
boxes, providing navigational data in the units specified in your
set up.
To select a Horizontal half-screen window for display:
1. From the full-screen Sonar mode, press the DISPLAY key.
The following soft keys are displayed with an image of each
available window:
WINDOWS
OFF ON
2. Set SPLIT to HOR. To select a different window, press either SELECT
WINDOWS soft key until the desired window is highlighted. If nec-
essary, press WINDOWS OFF ON to toggle Windows on.
3. Press ENTER.
4. To toggle Windows off, press the WINDOWS OFF ON soft key.
If any data boxes were displayed at the bottom of the full-screen
image, they are switched off until you return to full-screen mode.
Note: You can use the SCREEN soft key in chart mode to switch the
data boxes on. They are displayed in the upper window.
Figure 5-2 and Figure 5-3 show the half-screen horizontal win-
dows (in Sonar mode).
DSM250 Digital Sounder Module
SELECT
WINDOWS
hsb
2
hsb
2
SPLIT
HOR VER
D5011-1
Hide quick links:
Advertisement
Table of Contents
