Controlling The Display - Raymarine DSM250 Owner's Handbook Manual

Chapter 5: Basic Display Controls
COLOR
THRESH
➤
MULTI
COLOR
SETTINGS
COLOR SET
1 2

5.3 Controlling the Display

3. Press the COLOR THRESH soft key.
The color threshold soft keys are displayed below color indicator
showing the available echo colors.
The weakest color is at the bottom of the indicator, the strongest
color at the top; you can remove colors from the bottom up.
4. Press the left or right ADJUST COLOR THRESHOLD soft key to
change the color threshold.
Pressing the left key removes out the next color up, it increases the
minimum strength displayed.
Pressing the right key displays the next color down, it decreases
the minimum strength displayed.
5. Press ENTER or CLEAR twice to return to the MULTI soft keys.
Selecting the Color Settings
To change the color palette:
1. Press the MULTI key to display the soft key controls.
2. Press the COLOR SETTINGS soft key.
3. Press the COLOR SET soft key.
This toggles between color set 1, bolder colors, and color set 2,
softer colors.
4. Press ENTER or CLEAR twice to return to the default screen.
You control the display using the cursor and control keys. You
start all operations from the default screen, from which the default
soft keys are displayed:
FREQUENCY
When you have completed an action using the soft keys, press
ENTER or CLEAR to return to the default screen; you may need to
press ENTER or CLEAR several times to back-track through the
soft key hierarchy.
Note: If you have set up your system so that the default soft keys are
not displayed all the time, press any soft key to display the labels.
The remainder of this section describes how to select the mode of
operation and switch half-screen windows on/off.
ZOOM BTM.LOCK A-SCOPE
D5010-1
5-5