Switching Between Sounder And Other Modes - Raymarine DSM250 Owner's Handbook Manual

5-12
➤
DISPLAY

Switching Between Sounder and Other Modes

➤
50kHz
AUTO GC F
WAYPOINT
Rng 2.95nm
Brg 093°T
COURSE OVER GROUND
T
SPEED OVER GROUND
kts
DEPTH
ft
FREQUENCY ZOOM BTM.LOCK
WINDOWS SELECT
OFF ON WINDOWS
Figure 5-6: Vertical Half-Screen Window C
Returning to the Full-Screen Display
To return to the full-screen display you can turn windows off, as
previously described. To return to full-screen display:
Press and hold the DISPLAY key for 2 seconds to return to the
currently selected full-screen (upper window) display.
When you have both sounder and chart displayed in half-screen
windows the soft key CHRT SNR lets you toggle operating control
between the sounder and the chart window.
FREQUENCY
To change the active window when you are displaying the sonar/chart
horizontal split window, press the CHRT SNR soft key to toggle control
between the sounder and chart display. The current active display is
highlighted in gray (monochrome display) or red (color LCD) on the
CHRT SNR label and the cursor appears in that window.
0
20
40
60
60
60
A-SCOPE
SPLIT
HOR VER
D6209-1
ZOOM MORE¬
DSM250 Digital Sounder Module
CHRT SNR
D5013-1