Status Led - Raymarine DSM250 Owner's Handbook Manual

7-6

Status LED

The LED on the connector panel provides valuable information
on the status of your DSM250. The LED blinks green while the
module is operating normally. If the unit detects a problem, the
LED blinks amber to indicate a warning or red for an error. The
number of times the LED blinks is a code representing the nature
of the problem. For multiple warnings/errors, the codes are given
in sequence with a 1.5 second pause between strings.
The following table shows the various LED status codes and their
meanings.
Table 7-3: Status LED Indications
No of
Color blinks
W Amber
A
R
N
I
N
G
S
Red
E
R
R
O
R
S
1
After 30 seconds of no
No sonar pings are emitted and no warnings are output on the LED.
Instead, the LED blinks green once every 10 seconds.
Meaning
1 Transducer Sense Failure
2
not detected
hsb 2
3 High Temperature Warning
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Watchdog Timeout Reboot
1 Unknown Error
2 Battery Voltage Error
3 High Temperature Error
4 Flash Memory Failure
5 Reserved
6 Reserved
7 Reserved
8 Hardware Monitor Failure
activity, the DSM250 enters Standby mode:
hsb 2
DSM250 Digital Sounder Module
Cleared
every 10 min
1
x
x
x
x
x